Vacuum Tubing
Accuflow Systems Saint-Gobain PharMed BPT Pump Tubing, 0.020 in ID, 25 ft
Biocompatible peristaltic pump tubing formulated for reliable fluid transfer in pharmaceutical, bioprocessing, and laboratory systems. The tubing offers extended service life in peristaltic pumps, excellent chemical resistance, and compatibility with common sterilization methods used in aseptic processes.
- Inner diameter 0.020 in (0.5 mm).
- Outer diameter 0.145 in (3.7 mm), wall thickness 1/16 in (1.6 mm).
- Length 25 ft (7.6 m) packaged.
- Meets USP <88> Class VI and related biocompatibility standards.
- Withstands repeated autoclaving (up to five cycles) and gamma radiation up to 50 kGy.
- Operating temperature range -75 °F (-59 °C) to 275 °F (135 °C).
- Designed for peristaltic/roller pump use, aseptic filling, and transfer of shear-sensitive fluids.
Accuflow Systems Saint-Gobain Pump Tubing, Tygon XL-60, 1/8 in ID, TPE
Saint-Gobain Tygon XL-60 tubing is a long-life thermoplastic elastomer (TPE) formulated for peristaltic pump applications. It offers extended pump life compared with standard silicone or PVC tubing, remains flexible at low temperatures, and resists elevated operating temperatures.
- Material: thermoplastic elastomer (TPE), Shore A 60.
- Designed for peristaltic pump applications, long-life formulation.
- Internal diameter 1/8 in, outer diameter 1/4 in, wall thickness 1/16 in.
- Supplied in 50 ft lengths.
- Temperature range -40°F to 250°F (maximum recommended 250°F / 121°C).
- Pump life exceeding 500 hours under typical operating conditions.
Accuflow Systems Saint-Gobain Tygon Tubing, B-44-3 PVC, 1/8 in, 50 ft
Tygon B-44-3 tubing from Saint-Gobain is a clear, flexible beverage-grade PVC tubing formulated for food and beverage transfer and dispensing. It provides glass-like transparency for visual monitoring, broad chemical resistance, and non-wetting properties for easy cleaning and complete drainage. Available in 1/8 in inside diameter with a 50 ft coil, the tubing is suitable for soft drinks, fruit juices, flavored teas, and bottled water.
- Clear as glass for easy visual monitoring of flow.
- 1/8 in inside diameter, 3/16 in outside diameter.
- 50 ft coil length for extended runs.
- PVC formulation, Shore A hardness 66.
- Maximum operating pressure 34 psi at 73°F (2.3 bar at 23°C).
- Temperature rating up to 165°F (74°C); brittle below -32°F (-36°C).
- Vacuum rating 25 in Hg at 73°F (635 mm at 23°C).
- Contains no BPA or phthalates.
Accuflow Systems Saint-Gobain Tygon Tubing, Non-DEHP, 1/16 in I.D., 50 ft
Clear, flexible laboratory tubing formulated with a bio-based plasticizer for resistance to flex-fatigue and abrasion. The non-DEHP formulation offers low extractables and is suitable for analytical, biopharmaceutical, and instrumentation connections. Supplied in 50 ft coils for convenient bench and instrument use.
- Clear, flexible PVC tubing.
- 1/16 in (1.6 mm) inner diameter.
- 3/16 in (4.8 mm) outer diameter.
- 1/16 in (1.6 mm) wall thickness.
- 50 ft (15 m) package length.
- Formulation resists flex-fatigue and abrasion.
- Non-DEHP, bio-based plasticizer for reduced extractables.
- Typical use: laboratory connections, analytical instrumentation, gas and drain lines.
Accuflow Systems Saint-Gobain Tygon Tubing, Non-DEHP PVC, 3/8 in ID, 50 ft
Tygon E-3603 tubing is a crystal-clear, flexible thermoplastic tube formulated without DEHP for laboratory and medical fluid-transfer applications. It provides high clarity for visual inspection, consistent lot-to-lot performance, and mechanical properties suitable for peristaltic pumps, vacuum lines, and general laboratory use.
- 3/8 in (9.5 mm) inner diameter, 5/8 in (15.9 mm) outer diameter, 1/8 in (3.2 mm) wall thickness.
- 50 ft (15 m) packaged length.
- Non-DEHP, phthalate- and BPA-free PVC formulation.
- Shore A hardness 56, tensile strength 1750 psi, ultimate elongation 425%.
- Maximum recommended temperature 165 °F (74 °C); brittle temperature -51 °F (-46 °C).
- Maximum working pressure 25 psi at 73 °F; vacuum service to 29.9 inHg.
- Minimum bend radius 1-1/8 in (28.6 mm) for standard sizes.
- Smooth inner surface for low contamination and reliable fluid flow.
Accuflow Systems Saint-Gobain PharMed BPT Tubing, 1/4 in ID, 1/2 in OD
Saint-Gobain PharMed BPT tubing is a biocompatible thermoplastic tubing formulated for peristaltic pump applications in bioprocessing, diagnostics, and laboratory fluid handling. It offers chemical and oxidation resistance, low gas permeability, and durability under peristaltic pumping to maintain fluid integrity for shear-sensitive and sterile processes.
- 1/4 in inner diameter, 1/2 in outer diameter, 1/8 in wall, 25 ft per package.
- Opaque cream color for light sensitivity protection.
- Formulated for peristaltic pump compatibility and extended pump life.
- Meets USP <88> Class VI, USP <87>, and ISO 10993-5 biocompatibility requirements.
- Suitable for cell culture, media transfer, aseptic filling, and diagnostics.
- Low extractables with documented physiochemical and extractable testing.
Accuflow Systems Saint-Gobain Versilon Tubing, PVC, 3/8 in ID, 100 ft
Saint-Gobain Versilon C-219-A flexible PVC tubing is a clear, chemical-resistant, and highly flexible tubing engineered for fluid transfer applications including soap and detergent handling. It is made with a non-DEHP plasticizer, complies with REACH and RoHS, and contains no BPA or phthalates.
- Clear flexible PVC construction.
- 3/8 in ID x 9/16 in OD, 3/32 in wall, 100 ft coil.
- Non-DEHP plasticizer; REACH and RoHS compliant.
- Operates from -43°C to 74°C (-45°F to 165°F).
- Smooth inner wall resists build-up.
- Durometer 67 Shore A; tensile strength 2,450 psi; elongation 400%.
- Soft, easy to install; accommodates tight bend radii.
Accuflow Systems Saint-Gobain Tygon E-1000 Tubing, 3/8 in ID, 50 ft
Saint-Gobain Tygon E-1000 ultra-soft laboratory tubing engineered for peristaltic pumps and complex laboratory setups. The tubing is a clear, non-DEHP thermoplastic elastomer that remains flexible at very low temperatures, resists twisting and collapse, and exhibits low resistance to compression for low-torque or battery-driven peristaltic pumps.
- Ultra-soft thermoplastic elastomer tubing for peristaltic pumps and laboratory dispensing.
- Size: 3/8 in inner diameter, 5/8 in outer diameter, 1/8 in wall thickness.
- Length: 50 ft standard package length.
- Temperature range: remains flexible to -67°F (-55°C), maximum 125°F (52°C).
- Hardness: 40 Shore A for minimal compression resistance.
- Clear tubing for unobstructed visual monitoring of flow.
- Non-DEHP formulation and resistant to corrosive chemicals.
- Suitable for vent and drain lines, analytical instruments, and synthesis and research setups.
Accuflow Systems Saint-Gobain Tubing, PVC, 1/4 in I.D., 50 ft
Saint-Gobain Tygon tubing AAB00019 is a clear, flexible PVC tubing designed for beverage dispensing, bag-in-box, and general laboratory fluid transfer. It combines flexibility, chemical resistance, and a wide operating temperature range for reliable pumpability and dispense performance.
- Clear, flexible PVC construction for general-purpose fluid handling.
- Dimensions: 1/4 in inside diameter, 1/2 in outside diameter, 1/8 in wall, 50 ft length.
- Temperature range -32 to 165 °F suitable for cold and warm fluids.
- Working pressure approximately 62 psi at 73 °F.
- Suitable for beverage dispensing, bag-in-box, and laboratory transfer.
- Resistant to kinking and provides good pumpability.
Accuflow Systems Saint-Gobain Tygon Tubing, Non-DEHP, 1/16 in I.D., 50 ft
This medical-grade, non-DEHP tubing is formulated for blood-contact and fluid-delivery applications that require low extractables and broad sterilization compatibility. Supplied in 50 ft coils, the tubing offers a 1/16 in I.D., 3/16 in O.D., and 1/16 in wall thickness for flexible, reliable fluid transfer.
- Non-DEHP polymer with TOTM plasticizer; USP Class VI compatible.
- I.D.: 1/16 in; O.D.: 3/16 in; wall thickness: 1/16 in.
- Pack length: 50 ft coil.
- Minimum bend radius: 1/8 in.
- Suggested working pressure at 73°F: 100 psi.
- Vacuum rating at 73°F: 29.9 in Hg.
- Sterilization: autoclavable, gas, radiation (2.5 Mrad).
- Non-hemolytic and non-pyrogenic; suitable for blood-contact applications.
Accuflow Systems Saint-Gobain Tygon Tubing, Fuel Lubricant, 3/16 in ID, 50 ft
Flexible fuel and lubricant tubing formulated to resist swelling and hardening from hydrocarbon-based fluids. Suitable for small-engine fuel lines and general fuel and lubricant transfer applications.
- 3/16 in inner diameter, 5/16 in outer diameter.
- 1/16 in wall thickness.
- 50 ft length, bulk coil.
- Translucent yellow for fluid identification.
- Thermoplastic elastomer construction, hydrocarbon-resistant formulation.
- Maximum working pressure approximately 35 psi at 73°F for this nominal size.
- Shore A hardness around 57.
- Operating temperature range -35°F to 165°F (-37°C to 74°C).
- Typical applications include fuel and lubricant transfer, small engine fuel lines, and petroleum/alcohol blends.
Accuflow Systems Saint-Gobain Tygon Tubing, Non-DEHP, 1/8 in ID, 50 ft
Clear, biocompatible medical-grade thermoplastic tubing formulated without DEHP for blood-contact and medical fluid handling. Bondable and weldable, it resists common sterilization methods and minimizes hold-up volume for accurate fluid transfer in peristaltic pumps and IV systems.
- Biocompatible non-DEHP polymer, suitable for blood contact.
- Inner diameter 1/8 in (0.125 in / 3.18 mm), outer diameter 3/16 in (0.188 in / 4.76 mm).
- Nominal wall thickness 1/32 in, 50 ft standard package length.
- Crystal clear for easy visualization of fluid flow.
- Compatible with autoclave, EtO, and gamma sterilization methods.
- Maximum recommended operating temperature 165°F (74°C).
- Typical applications: blood and IV solutions, dialysis, drug delivery, diagnostic equipment, and respiratory therapy.
Accuflow Systems Saint-Gobain PharMed BPT Tubing, 5/8 in ID, 25 ft
PharMed BPT tubing from Saint-Gobain is a thermoplastic elastomer tubing engineered for demanding peristaltic pump applications in bioprocessing, diagnostics, and laboratory fluid handling. It provides extended flex life compared with silicone, broad chemical resistance, and an opaque profile that helps protect light-sensitive fluids.
- Material: proprietary thermoplastic elastomer formulated for peristaltic pumping.
- Dimensions: 5/8 in ID, 7/8 in OD, 1/8 in wall, 25 ft length.
- Compliance: USP Class VI and ISO 10993-5 biocompatibility.
- Temperature range: -75°F to 275°F (-59°C to 135°C) service range.
- Chemical resistance: very good general resistance; excellent acid, alkali, and oxidizer resistance.
- Color and opacity: opaque cream, blocks visible and UV light.
- Typical applications: peristaltic pump lines, cell harvest and media transfer, diagnostic fluid handling.
Accuflow Systems Saint-Gobain PharMed BPT Tubing, 1/16 in ID, 1/8 in OD
Saint-Gobain PharMed BPT peristaltic pump tubing provides a biocompatible fluid-contact surface, extended pump life compared with silicone, and resistance to common sterilization methods suitable for bioprocessing and laboratory fluid transfer.
- Formulated thermoplastic elastomer for peristaltic pumping.
- Dimensions: 1/16 in ID, 1/8 in OD, 1/32 in wall, 25 ft length.
- Opaque cream color to protect light-sensitive fluids.
- Meets USP Class VI and ISO 10993-5 biocompatibility requirements.
- Sterilization: autoclavable (30 min at 121 °C), tolerant to 50 kGy gamma radiation.
- Maximum service temperature 275 °F (135 °C); low temperature embrittlement at -75 °F (-59 °C).
- Max working pressure 24 psi at 73 °F, 14 psi at 180 °F; vacuum rating 29.9 in Hg.
- Typical uses: cell harvest, bioreactor lines, aseptic filling, filtration, and diagnostics.
Accuflow Systems Saint-Gobain Tygon ND 100-65 Tubing, 1/4 in I.D., 100 ft
Tygon ND 100-65 tubing is a medical/surgical-grade flexible tubing formulation designed for reliable fluid transfer in clinical and laboratory equipment. It provides precise, consistent dimensions and flexible handling for applications requiring clarity and predictable performance.
- Medical/surgical grade formulation for clinical and laboratory fluid handling.
- 1/4 in inner diameter, 7/16 in outer diameter, 3/32 in wall thickness.
- 100 ft packaged length for continuous runs and assemblies.
- Flexible, transparent construction for visual monitoring of fluid flow.
- Suitable for peristaltic pump applications and general tubing assemblies.